Computer Case

Here are just some brief information about my homebuilt computer case.
Did it mostly for fun but also wanted a smaller box.

Here is the frame with the motherboard and power supply that I glued together with Chemical Metal
I also need a Riser card because the graphics card will not fit on the side of the motherboard.
The box is upside down because the motherboard is mounted in the top of the box.


The box screwed together before painting.
The second image is the box upside down because the fans mounted on the underside.


All parts are drying after painting.


Here I have connected the hard drive and power cable.


And finally the finished computer case.
Also shows the underside where the fans are mounted.